Altronix eBridge4SPT Installation Instructions Manual do Utilizador descarregar pdf (Página 2)

- 2 - eBridge4SK

 b.Connect56VDCULListedClass2orlimitedpowersourcetowireinsertconnector[Power--- Input +] (polarity

observed) (Fig. 1, pg. 2). Use 22AWG-16AWG wire for this connection.

Caution:56VDCwillbepresentoncoax.TheotherendofthecoaxshouldonlybeconnectedtotheeBridge4SPT.

 c.Connectstructuredcablefromethernetswitch/NVR(networkvideoserver)toRJ45jackmarked[10/100BaseT]

(Fig. 1, pg. 2).

 d.ConnectCoaxcabletoBNCconnectormarked[Coax](Fig. 1, pg. 2).

2. eBridge4SPT installation:

a. Attach mounting brackets to eBridge4SPT for wall mount installation (Fig. 3, pg. 7).

Affix rubber pads to eBridge4SPT for shelf installation (Fig. 4, pg. 7).

 b.ConnectCoaxcablefromeBridge1SPRtoBNCconnectormarked[Coax]locatedonthebackofthe

unit (Fig. 1, pg. 2).

 c.ConnectstructuredcablefromIPcamera/devicetoRJ45jackmarked[PoEOutput10/100BaseT](Fig. 1, pg. 2).

Note:TheeBridgeisdesignedtoaccommodateMegapixel,HD720,HD1080andVGA(SD)cameras.Itisimportant

to note that some high resolution and high frame rate cameras may demand faster headend processing ability, such as a

PC graphics card to present a quality image. If the headend processing equipment is insufficient in speed, the image may

show pixilation and latency. It is advisable to pretest system if unsure. Alternatively, frame rate and resolution may be

reduced to accommodate system equipment.

Technical Specifications:

Parameter Description

Connections BNCforCoaxlink.RJ45forethernetlink.

Input power requirements eBridge1SPR-51-56VDC/100W@max.power.

eBridge4SPT - powered by eBridge1SPR.

Indicators Blue: Coax Link.

Yellow(RJ45connector):On-Link,Off-NoLink,Blinking-Activity.

Green(RJ45connector):On-100Base-TX,Off-10Base-T.

Environmental

Conditions

Operating Ambient Temperature: UL60950-1 14ºF to 122ºF (-10ºC to 50ºC).

Relative humidity: 85%, +/ --- 5%

Storage Temperature: --- 4º to 158ºF (--- 20º to 70ºC) Storage

Operating Altitude: --- 1000 to 6,561.679 ft. (--- 304.8 to 2000m).

Regulatory Compliance UL/CUL Listed for Information Technology Equipment (UL 60950-1). CE approved.

Weights (approx.) eBridge1SPR - Product: 5.1 oz. (0.144 kg.), Shipping: 7.76 oz. (0.22 kg.)

eBridge4SPT - Product: 2.9 lbs. (1.32 kg), Shipping: 3.9 lbs. (1.77 kg)

Typical Application:

Fig. 1

Coax SLOC

link LED

Up to 1500 ft.

Input

56VDC

Up to 328 ft.

Up to

328 ft.

Up to

328 ft.

Up to

328 ft.

Up to

328 ft.

Ethernet Switch

NVR Network

Video Server

(Head End

Equipment)

eBridge4SPT (back)

eBridge4SPT (front)

PoE

Output

10/100

Base-T

eBridge1SPR

IP Camera

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários

Altronix eBridge4SPT Installation Instructions Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para eletricidade Altronix eBridge4SPT Installation Instructions