Altronix AL624E Installation Instructions Manual do Utilizador descarregar pdf

Overview:

The AL624E Linear Power Supply / Charger will convert a low voltage AC input to a low voltage DC output.

This general purpose power supply has a wide range of applications for access control, security and CCTV system

accessories that require additional power.

Specifications:

Input:

• Input16VACto24VAC,20VAto40VA(Voltage Output/Transformer Selection Table)

Output:

• Switchselectable6VDC-12VDC-24VDC.

•1.2ampcontinuoussupplycurrentat6VDC-12VDC.

• 750mAcontinuoussupplycurrentat24VDC.

•Filteredandelectronicallyregulatedoutput.

Battery Backup:

•Built-inchargerforsealedleadacidorgeltypebatteries.

• Maximumchargecurrent300mA.

•Automaticswitchovertostand-bybatterywhenACFails.

•PTCbatteryprotection.

Additional Features:

•Thermalandshortcircuitprotectionwithautoreset.

• ACinputandDCoutputLEDindicators.

• Extremelycompactdesign.

• Includesbatteryleadsandenclosure.

Enclosure Dimensions: 8.5”H x 7.5” W x 3.5” D

Voltage Output/Transformer Selection Table:

Output Voltage Selector (JMPR) Transformer

6VDC@1.2ampcontinuoussupplycurrent CutJumperJ2Only 12VAC/20VA

(AltronixmodelTP1220)

12VDC@1.2ampcontinuoussupplycurrent LeaveJ1&J2Intact 16.5VAC/20VA(AltronixmodelTP1620)

24VDC@750mAcontinuoussupplycurrent CutJumperJ1Only 24VAC/40VA(AltronixmodelTP2440)

Installation Instructions:

1. Mount AL624 into enclosure (Fig. 1, pg. 2).

2. Mount AL624E in desired location.

3. Unit is factory set for 12VDC. For6VDCoutputcutjumperJ2,for24VDCoutputcutJumperJ1.

4. Connect proper transformer to terminals marked [AC] (Voltage Output/Transformer Selection Table).

Use 18 AWG or larger for all power connections (Battery, DC output).

5. Measureoutputvoltagebeforeconnectingdevices.Thishelpsavoidpotentialdamage.

6. Devicestobepoweredshouldbeconnectedtoterminalsmarked[+DC]and[DC-BAT]carefullyobservingpolarity.

7. Connectbatterytoterminalsmarked[BAT+]and[DC-NEG](batteryleadsincluded)

Note:Whenbatteriesarenotused,alossofACwillresultinalossofoutputvoltage.

LED Diagnostics:

Red (DC) Green (AC) Power Supply Status

ON ON Normaloperatingcondition.

ON OFF LossofAC,Stand-bybatterysupplyingpower.

OFF ON NoDCoutput.Shortcircuitorthermaloverloadcondition.

OFF OFF NoDCoutput.LossofAC.Dischargedornobatterypresent.

AL624E - Linear Power Supply / Charger

1 2

Resumo do Conteúdo

Página 1 - (AltronixmodelTP2440)

Overview:The AL624E Linear Power Supply / Charger will convert a low voltage AC input to a low voltage DC output.This general purpose power supply has

Página 2 - Terminal Identification:

Altronixisnotresponsibleforanytypographicalerrors.Productspecificationsaresubjecttochangewithoutnotice.14058thStreet,Brooklyn,NewY

Comentários a estes Manuais

Sem comentários

Altronix AL624E Installation Instructions Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Acessórios para eletricidade Altronix AL624E Installation Instructions. Altronix AL624E Installation Instructions User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para eletricidade Altronix AL624E Installation Instructions