Altronix ACM4CBE Guia de Instalação

Rev. 082808ACM4 SeriesAccess Power ControllersInstallation GuideModels Include:ACM4- Four (4) Fuse Protected OutputsACM4E- Four (4) Fuse Protected Out

- 2 - ACM4 seriesOverview:These units convert one (1) 12 to 24 volt AC or DC input into four (4) independently controlled fused or PTC protectedoutput

ACM4 series - 3 -• Output ratings:- Fuses are rated 3 amp each.- PTCs are rated 2.5 amp each.• Main fuse is rated at 10 amp.Note: The total for all ou

- 4 - ACM4 seriesconnect the positive (+) input of the device being powered to the terminal marked [NC]. For Fail-Secure operation connect the positiv

ACM4 series - 5 -5. Fire Alarm Interface options (Figs. 3 through 7, pg. 6):A normally closed [NC], normally open [NO] input or polarity reversal inpu

- 6 - ACM4 seriesHook-up Diagrams: NO C NC FACP + INP --- T + RET --- INTERFACETRGJ3JUMPERN.C. DRYTRIGGERINPUTFig. 4 Normally Open - Non-Latch

ACM4 series - 7 -Enclosure Dimensions:• ACM4E and ACM4CBE 8.5"H x 7.5"W x 3.5"D

- 8 - ACM4 seriesUL Listed Sub-Assembly Installation Instructions:The following Altronix sub-assembly modules may be field installed in the AL300ULX(R