Altronix FireSwitch108 Data Sheet Manual do Utilizador descarregar pdf

Input:

• Powerinput:120VAC60Hz,4.8amp.

• Two(2)ClassAortwo(2)ClassBFACPinputs.

• Two(2)configurableinputstriggerviaClassAor

 ClassBFACPsignalcircuits(polarityreversal)or

 drycontacts.

Output:

• 24VDCvoltageregulatedpower-limitedNACoutputs.

• Outputpower:

 10ampmax.totalalarmcurrent.

 7ampmax.stand-bywithoutbatteryback-up.

 1ampwithbatteryback-upincluding

 dedicatedAux.output.

 For Canadian applications Stand-by with

battery backup is limited to 0.45 amp.

• 2.5ampmaxcurrentperoutput.

• One(1)auxiliaryoutputratedat1amp

 (regulated,batterybackedup).

 0.45 amp for Canadian applications.

• AnyNACcanbeconfiguredasanAux.outputwithor

 withoutbatteryback-up(specialapplicationonly).

 WhensetasAux.output,theoutputisnotsupervised.

• Programmablesupervisedindicatingcircuitoutputs:

 Eight(8)ClassBorFour(4)ClassA,

 oranycombinationofClassAandClassBcircuits.

• Thermalandshortcircuitprotectionwithautoreset.

Battery Backup:

• Built-inchargerforsealedleadacidorgeltypebatteries.

• Automaticswitchovertostand-bybatterywhen

 ACfails.

• Zerovoltagedropwhenswitchingoverto

 batterybackup.

Supervision:

• ACfailsupervision(form“C”contacts).

• Batteryfail&presencesupervision(form“C”contacts).

• Lowpowershutdown.ShutsdownDCoutputterminals

 ifbatteryvoltagedropsbelow70-75%for24Vunits.

 Preventsdeepbatterydischarge.

Special Features:

• ProgrammableLCDdisplayinterface.

• Ethernetportinterfaceforremoteprogrammability

 andmonitoring.

• 2-wirehorn/strobeSyncmodeallowsaudible

 notificationappliances(horns)tobesilenced

 whilevisualnotificationappliances(strobes)

 continuetooperate.

• TemporalCode3,SteadyMode,InputtoOutput

 FollowerMode(maintainssynchronizationof

 notificationappliancescircuit).

• Compatiblewith12VDCor24VDCfirepanels.

• Outputloopsupervisiondirectedtoinput1orinput2.

• CommontroubleDryN.C.outputforreporting

 troubletoremoteFACP.

• Groundfaultdetection-Groundfaultmaximumtest

 impedance1,000ohm.

• GroundfaultDryN.O.outputtoreportgroundfault

 toremoteFACP.

Electrical:

• Operatingtemperature:0ºCto49ºCambient.

• BTU/Hr.:122.84BTU/Hr.

• SystemACinputVArequirement:576VA.

Visual Indicators:

• LCDdisplay-Indicatestroublesandconditionsof

 operation.TroubleConditionMemoryfacilitates

 quickidentificationofanintermittent/fault

 (shortcircuit,openorground)whichhaspreviously

 occurredononeormoresignalingcircuitoutputs.

 LCDdisplayswhichoutputthefaulthasoccurredon.

Mechanical:

• EnclosureDimensions(HxWxDapprox.):

 15.5”(393.7mm)x12”(304.8mm)x4.5”(114.3mm)

 - Accommodatesuptotwo(2)12VDC/12AHbatteries.

• Productweight(approx.):12.4lbs.(5.62kg).

• Shippingweight(approx.):13.7lbs.(6.21kg).

Specifications

TheAltronixFireSwitch108isacosteffectivemanagedNACPowerExtender.Itinterfaces

with 12 or 24VDC Fire Alarm Control Panels (FACP) to provide Notification Appliance

Circuitexpansionsupport,foradditionalhorns/strobestoallowADAcompliancy.Italsopro-

videsauxiliarypowertosupportsystemaccessories.Itdeliverselectronicallyregulatedand

filtered24VDCpowertoClassBorClassANACloopcircuits.Additionally,aseparate1amp

auxiliaryoutputfor4-wiresmokedetectorsisavailable.Alarmcurrentcanbedividedbetween

theeight(8)outputsforpoweringNACdevices.Outputsareratedat2.5ampmax.,andcan

beindependentlyprogrammedforSteady,TemporalCode3orStrobeSynchronization.All

outputsmaybeprogrammedforInputtoOutputFollowerMode

(outputwillfollowinput.i.e.MarchTimeInput,MarchTime

Output).Innon-alarmconditionindependentloopsupervision

forClassAand/orClassBFACPNACcircuitsisprovided.Intheeventofalooptrouble,theFACPwillbenotified

viathesteeredinput(input1orinput2).Inaddition,therearecommontroubleoutputterminals[NC,C,NO]which

areusedtoindicategeneralloop/systemtrouble.Two(2)FACPsignalingoutputscanbeemployedanddirectedto

controlsupervisionandpowerdeliverytoanycombinationoftheeight(8)outputs.ItprovidesaprogrammableLCD

displayinterface,plusanethernetportinterfaceforremoteprogrammabilityandmonitoring.

FireSwitch108

Managed NAC Power Extender

Rev.DSFireSwitch108_02082013

FireSwitch108

Overview

1 2

Resumo do Conteúdo

Página 1 - Managed NAC Power Extender

Input:• Powerinput:120VAC60Hz,4.8amp.• Two(2)ClassAortwo(2)ClassBFACPinputs.• Two(2)configurableinputstriggerviaClassAor Cl

Página 2 - Agency Approvals

Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.comEnclosure Dimensions (H x W x D) (approximate):15.5”

Comentários a estes Manuais

Sem comentários

Altronix FireSwitch108 Data Sheet Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Acessórios para eletricidade Altronix FireSwitch108 Data Sheet. Altronix FireSwitch108 Data Sheet User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para eletricidade Altronix FireSwitch108 Data Sheet