Altronix ACM4CB Installation Instructions Manual do Utilizador descarregar pdf (Página 5)

ACM4 series - 5 -

LED Diagnostics:

LED ON OFF

LED 1 - LED 4 (Red) Outputrelay(s)energized. Outputrelay(s)de-energized.

TRG(Green) FACP input triggered (alarm condition). FACP normal (non-alarm condition).

Terminal Identification Table:

Terminal Legend Function/Description

-- Power + 12VDC to 24VDC input from UL Listed Access Control Power Supply.

-- Control +

These terminals can be connected to a separate, UL Listed Access Control Power Supply

to provide isolated operating power for the ACM4/ACM4CB

(jumpersJ1andJ2Mustberemoved).

TRIGGER

INPUT 1 - INPUT 4

IN,GND

From normally open and/or open collector sink trigger inputs

(request to exit buttons, exit pir’s, etc.).

OUTPUT 1 - OUTPUT 4

NC, C, NO, COM

12to24voltsAC/DCtriggercontrolledoutputs:

Fail-Safe [NC positive (+) & COM Negative (-)],

Fail-Secure [NO positive (+) & COM Negative (-)],

Auxiliary output [C positive (+) & COM Negative (-)]

(WhenusingACpowersuppliespolarityneednotbeobserved),

NC, C, NO become form “C” 5 amp 24VAC/VDC rated dry outputs when fuses are

removed (ACM4). Contacts shown in a non-triggered state.

FACP INTERFACE

T, + INPUT --

Fire Alarm Interface trigger input from FACP. Trigger inputs can be normally open,

normally closed from an FACP output circuit (Fig. 3 through 7, pg. 6).

FACP INTERFACE

NC, C, NO

Form “C” relay contact rated @ 1 amp 28VDC for alarm reporting.

(This output has not been evaluated by UL).

1 2 3 4 5 6 7 8

Sem comentários

Altronix ACM4CB Installation Instructions Manual do Utilizador Página 5